【ZNC-450/550 High Performance Presicion EDM ShapingMachine】
1、Parameters of machine | Tablesize | Travel of X.Y.Z（mm） | Size of oil sink | Bearing of spindle | Bearing of table | D350 | 600×350 | 330×230×180+(180) | 880×520×350 | 50kg | 300 kg | D430 | 600×350 | 400×300×200+(200) | 1100×600×360 | 70 kg | 500 kg | D450 | 700×420 | 450×350×200+(200) | 1180×620×400 | 70 kg | 600 kg | D540 | 800×480 | 500×400×250+(300) | 1250×750×500 | 120 kg | 1200 kg | D650 | 1000×600 | 630×530×250+(350) | 1700×1000×560 | 250 kg | 3500 kg |
2、Parameters of jack box Max current of machining | Max speed of machining | Min consumption of electrode | Best surface accuracy | Input power | Type of jack box | 30A | 200m3/min | 0.3% | 0.3umRa | 3KVA | Normal(traditional) | 60A | 400m3/min | 0.3% | 0.3umRa | 5 KVA | Including expert system and nixietube display | 100A | 800m3/min | 0.3% | 0.3umRa | 8 KVA | CRT display and computer-aided logic control system |
3、Machine configuration - The body of machine is made of resin bonded sand
destressinghigh-quality cast iron.
- The X spindle and the Y spindle are imported ball screw,TheZ
spindle is "Sugang" nut screw which was made in Taiwan,andit can
also be change to ball screw.
- Japan "SANYO" DC servomotor.
- The Z spindle use the high-precision roller dump rail of
Switzerland"Schneeberger".
- Micron order bearing,and planker use the imported Teflon slideway
faing
- Denmark "GRUNDFOS" oil pump or Italy "CALPEDA"oil pump.
- Electrode tip imported with original packaging from
Taiwan,andautomatic fire extinguisher.
- Lamps,handpower oil pump,surface cock,gasket,dial test
indicator,manometerare all imported from Taiwan.
- Lacquering the machine according to the color selected by client.
4、Jack box configuration - 30A traditional jack box that use the imported
components,isefficient and lower energy cost.
- * 40A and 60A nixietube display,Z spindle NC ED expert
system,60group machining code.You have only to input the current
and anglefor machining,and easily change the parameters to finish
the continuousautomatic 10-steps machining.
* Speed of the machining is controlled by computer,2-steps
electricaldischarge,ARC,fireproof,liquid level control.
* electrode dissipation < 0.3%degree of finish 0.3umRa - * 75A,100A Pentium industrial controller,colorful CRT display.
* （Fuzzy Logic）computer-aided logic control system,the
copperelectrode of special circuit for depth drill
machining,extensivemachining、stoma electrical
discharging,microstoning,separationcircuit of graphite resistor
rod.The parameters of electricaldescharging are automatically
modified by computer.conversationalinput operation,perfect
protecting device. - 3 axis Easson optical ruler.
|
