| |||||||||||||
Product Name: | Category: | Epoxy Floor Paint | |
Specification: | Click: | 193 | |
Remarks: | Description: Maydos JD2000 Epoxy Self-leveling Flooring System is two-component solvent-free epoxy paint. It has a nice appearance, dust-resistant, corrosion-resistant and easy to clean. The flooring system has good bonding with the solid base, good abrasion resistance and durability. Meanwhile, it has certain toughness, brittle-resistance and the load of a certain weight. The compressive strength and impact resistance ability is excellent. Advantages of The Finish (Topcoat): 1. The surface of the Self-leveling coat is as smooth as the mirror. 2. Seamless, non-dusty and easy to clean. 3. Solvent-free and environmental. 4. Close-grained surface has good corrosion-resistance to various chemicals. 5. Have a large range of colors for the customer’s reference. Where to Use: It can be applied in the non-dusty and non-bacteria areas like pharmacy factory, hospital, Precision Machinery, electronic factory, etc. Requirements for the base: 1. Concrete strength≥C25; 2. Flatness: the maximum fall head in 2M distance＜3mm. 3. The first layer must have waterproof treatment. Technical Data: Drying Time: Touch dry: 2 hours Hard dry: 2 days Compressive Strength (Mpa): 68 Impact resistance strength (Kgcm): 65 Adhesive force grade: 1 Pencil Hardness (H): 3 Abrasion resistance(750g/1000r, g)0.03 Resistance to engine oil, diesel oil for 60 days: no change Resistance to 20% sulfuric acid for 20 days: no change Resistance to 20% Sodium hydroxide for 30 days: no change Resistance to toluene, ethanol for 60 days: no change Service Life: 8 years Shelf Life: 6 months Application Procedure: 1. Substrate preparation: Cleaning up and polishing the surface to remove floating pulp. The surface must be clean, dry and leveled up. 2. Primer: Apply JD-D10 epoxy high-solid primer by roller. The primer must be even and exhaustive. The primer should be stirred evenly according to the mixing ratio, then applied directly. The quantity of the builders can be decided as per the square meters of the area. Using roller and waiting for 8 hours to construct the next process. Inspection standards for the primer: even film with certain brightness. 3. Putty: Fine grinding by 325# sand paper and ash removal, mixing JD-D10 with appropriate amorphous silica and apply directly with drawknife. The quantity of the builders can be decided as per the square meters of the area. Waiting for 12 hours to construct the next process. Inspection standards for the putty: Non-sticky to hand, no softening, no nail print if scratching on the surface. 4. Sealer: Fine grinding and ash removal. Apply a layer of JD2000A as the sealer. 5. Finish: Apply JD2000A epoxy self-leveling finish, using the gear roller to defoam during application. Inspection standards for the putty: even film, no bubbling, uniform color and good scratch resistance. Maintenance: 5-7 days. Don't use or wash by water and other chemicals. Technical Data: JD-2000A JD-2000B Color Mix colors Light yellow or nearly colorless Special gravity 0.95±0.02 1.55±0.05 Mixing ratio JD2000AJD2000B = 5:1 Using time 60 min. (15℃) 30 min. (25℃) 15 min. (35℃) Touching dry 48h (15℃) 24h (25℃) 12h (35℃) Hard dry 10 days (15℃) 7 days (25℃) 4 days (35℃) VOC content ≤2% (after mixing) Application Instructions: Mixing: JD2000B may have small amount of sediment during storage. So it must be stirred evenly before mixing. Pour JD2000A and JD2000B into the barrel according to the mixing ratio and stirred evenly. Don't scrape the mixed paint inside or at the bottom of the barrel so as to avoid the uneven mixed phenomenon. Reference dosage: 0.8～1.5/ Film Thickness: 0.5～1.1mm Clean up of the tools: by KC-X-1 epoxy thinner Construction conditions: temperature ≥10 ℃; relative humidity85% Notes: 1. When the temperature rises or ingredients increases, the use of the corresponding time will shorten. 2. The application environment must be clean, dry and dustless. 3. The film may be dulling or floating if the relative humidity is above 80% during application and hardness period. Health and safety information: It contains certain chemicals which can cause skin irritation. Wear gloves, masks while handling the product, washing thoroughly after handling. Should skin contact occur, wash immediately with soap and water. During application and curing in closed rooms, adequate fresh air ventilation must be provided. Keep away from open flames including welding. In case of accidental eye contact, wash with a large quantity of water and immediately seek medical advice. For detailed health, safety, environment recommendations, please consult and follow the instruction on the product material safety data sheet. Disclaimer: The information given in this sheet is not intended to be exhaustive. Any person using the product without first making further written enquiries as to the suitability for the intended purpose does so at his own risk and we can accept no liability of the product for any loss or damage arising out of such use. The information contained product development. Product data are subject to change without notice and become void five years from thedate of issue. | ||
Product Name: Hot melt adhesive for Packing Category: Hot Melt Glue Specification: 25KG/CTN Click: 246 Remarks: Maydos Hot Melt Adhesive Chop (for ...
Product Name: Hot Melt Adhesive stick for general use Category: Hot Melt Glue Specification: 25KG/CTN Click: 233 Remarks: Maydos Hot Melt Adhesive ...
Product Name: Hot Melt adhesive for furniture edge sealing Category: Hot Melt Glue Specification: 25KG/CTN Click: 212 Remarks: Maydos Hot Melt ...
Product Name: Hot melt adhesive stick for Electronic Product Category: Hot Melt Glue Specification: 25KG/CTN Click: 244 Remarks: Maydos Hot Melt ...
Product Name: Maydos Roofbond Roofing Paint(Water base) Category: Epoxy Floor Paint Specification: 5L,20L Click: 549 Remarks: Model: MR007 Maydos ...
Product Name: Maydos Outdoor Polyurethane Weathering Resistant Floor Paint Category: Epoxy Floor Paint Specification: 5L,20L Click: 326 Remarks: Model...
