Epoxy Self Leveling Paint

Epoxy Self Leveling Paint
Name: Epoxy Self Leveling Paint
Specification: 20KG, 25KG
Model: JD2000 & JD-D10
Description
Maydos JD2000 epoxy self leveling paint is a type of two-component solvent-free epoxy paint. This epoxy paint has good bonding with the solid base.
Its paint film has nice appearance and good durability, and is dust resisting, abrasion resisting, corrosion resisting, and easy to clean. Meanwhile, it has certain toughness, brittle-resistance and the load of a certain weight. Its compressive strength and impact strength is excellent.
Advantages of the Finish (Topcoat)
1. Exaggeratedly speaking, the paint film is as smooth as a mirror.
2. Seamless, dust-free and easy to clean.
3. This epoxy self leveling paint is designed based on solvent-free formulation and environmentally friendly.
4. Close-grained surface has good resistance to chemical corrosion.
5. Our epoxy self leveling paint is provided with a large range of colors for the customer's reference.
Where to Use
Our epoxy self leveling paint is applicable for dust-free and bacteria-free areas like pharmacy factories, hospitals, precision machinery, electronic factories, etc.
Requirements on Substrate
1. Concrete strength ≥C25.
2. Flatness: the maximum fall head in 2M distance< 3mm.
3. The substrate surface should be given waterproof treatment.
Performance Indexes of Epoxy Self Leveling Paint

Drying time	Touch dry: 2hours Hard dry: 2 days
Compressive strength (Mpa)	68
Impact resistance (Kgcm)	65
Adhesive force	Grade 1
Pencil hardness (H)	3
Abrasion resistance(750g/1000r, g)	≤0.03
Resistance to engine oil, diesel oil for 60 days	Make no difference
Resistance to 20% sulfuric acid for 20 days	Make no difference
Resistance to 20% Sodium hydroxide for 30 days	Make no difference
Resistance to toluene, ethanol for 60 days	Make no difference
Service Life	8 years
Shelf Life	6 months

Application Processes
1. Substrate preparation
Before applying epoxy self leveling paint, please clean up and polish the surface and make sure the polished surface is clean, dry and leveled up.
2. Primer preparation
Firstly mix JD-D10 epoxy primer well according to standard mixing ratio, and then apply it directly with a roller.
Wait for 8 hours before start the next application step.
Inspection standards for the primer: even film with certain brightness.
3. Putty
Polish the surface with 325# sandpaper and then remove the ash.
Mix JD-D10 epoxy self leveling primer paint with a certain amount of amorphous silica and then apply the mixture onto surface directly with a drawknife.
Wait for 12 hours before start the next process.
Inspection standards for the putty: Non-sticky to hand, no softening, no nail print if pressing on the surface.
4. Sealer
Fine grinding and ash removal. Apply a layer of JD2000A epoxy self leveling paint as the sealer.
5. Finish coating
Apply JD2000A epoxy self leveling paint (finish paint). Meanwhile, use a roller to defom during application.
Inspection standards: even film, no bubbling, uniform color and good scratch resistance.
6. Paint film maintenance
5-7 days. Don't contact directly with water and chemicals.
Physical parameters of Epoxy Self Leveling Paint

Model	JD-2000A epoxy self levelingpaint	JD-2000B epoxyself leveling paint
Color	Light yellow, near colorless	Color matchable
Specific gravity	0.95±0.02	1.55±0.05
Mixing ratio	JD2000AJD2000B = 5:1
Duration of service after mixing	60min (15℃)	30min (25℃)	15min (35℃)
Touch dry	48h (15℃)	24h (25℃)	12h (35℃)
Hard dry	10d (15℃)	7d (25℃)	4d (35℃)
VOC content	<2% (after mixing)

Application Instructions
1. Mixing
JD2000B epoxy self leveling paint may have small amount of sediment during storage. So it must be stirred well before mixing.
Mix JD2000A and JD2000B epoxy paint at a certain ratio and then stir them well.
Don't scrape the mixed paint inside or at the bottom of the barrel so as to avoid the uneven mixed phenomenon.
2. Reference coverage: 0.8-1.5 kg/m2/coat
Paint film thickness: 0.5-1.1mm
3. Tool cleaning: by KC-X-1 epoxy thinner
4. Construction conditions: temperature ≥10 ℃; relative humidity85%
Notes
1. When the temperature rises or paint ingredient amount increases, the duration of service of mixed paint will shorten.
2. Our epoxy self leveling paint should be applied in clean, dry and dustless environment.
3. The paint film may be dulling or floating if the relative humidity is above 80% during application and curing period.
Health and Safety Information
Our epoxy self leveling paint contains certain chemicals which can cause skin irritation. So, please wear gloves and masks before applying the paint, and wash thoroughly after applying.
In case of skin contact, immediately wash with soap and water.
Apply and cure in well ventilated conditions.
Keep epoxy paint away from open flames and spark.
I gotten into eyes, immediately wash with large quantity of clean water, and seek medical treatment as soon as possible.
More detailed information, please contact us directly.
Disclaimer
The information given in this sheet is not intended to be exhaustive.
So, we recommend making further enquiries in written form, before applying our epoxy self leveling paint. Or else, we will not responsible for any loss or damage caused by improper use.
Product data is subject to change without prior notice. And the data is valid for five years from the date of issue.
Maydos Building Materials Company is an epoxy paint manufacturer in China. Since our foundation on 1995, we have been dedicated to producing superior quality industrial epoxy floor paint, commercial epoxy paint, etc. to our customers. In addition to epoxy paint, we also produce emulsion paint, wood varnish, and insulating paint, and more.
Due to reliable quality and competitive prices, our decorative and protective coating materials are extensively used in national projects, like the Great Hall of the People, 2008 Olympic Velodrome, etc. They are also used in Australia, France, Iran, Germany, Russia, and so on.
Really appreciate your interest in our epoxy floor paint. Welcome to try our products.