| Environmental-friendly, Flame retardant, Dual Wall, Adhesive-lined
Heat Shrinkable tubing |
|
|
| | | | | | | | | | Flame Retardant | | Moistrue Blocking | | | | | | | | | | | | Shrink Ratio 3:1 | | Shrink Ratio 4:1 | | | |
|
|
|
| | Features | - Dual wall
- Adhesive-lined bonds to a wide variety of plastics, rubbers, and
metals
- Shrink ratio (Radial change): 3:1or4:1 ,shrink ratio in
longitudinal≤10%
- Min. shrink temperature: 80℃; Full recovery temperature: 110℃
- Continuous Operating Temperature: -55℃~125℃
- Specifications / Approvals:UL 224 (UL File NO.E142415)
- Flame-retardant
- Excellent water-proofing and sealing performance
- High insulating strength
- Excellent chemical and solvent resistance properties
- Meet ROHS(Restriction of use of certain Hazardous
Substances)requirement
| |
|
|
| Application
Environmentally seals and protects a wide variety of electrical
applications, including back end connector sealing, breakouts, and
connector to cable transitions. High expansion ratio makes it
possible to repair most damaged cable jackets without removing
connectors, ideal for effective moisture-resistant insulation. | |
|
|
| | Technical Data | | Item | | Property | | Requirements | | Typical Performance | | Test Method | | | | | | | | | | | | | Mechanical | | Tensile Strength | | ≥10.4MPa | | 13MPa | | UL 224 | | | | | | | | | | Ultimate elongation | | ≥200% | | 450% | | UL 224 | | | | | | | | | | Tensile Strength after Heat Aging (158 ℃/168hrs) | | ≥7.3MPa
| | 11MPa | | UL 224 | | | | | | | | | | Ultimate elongation after Heat Aging(158 ℃/168hrs) | | ≥100% | | 360% | | UL 224 | | | Electrical | | Dielectric withstand voltage | | AC.2.5kV/60seconds | | Pass | | UL 224 | | | | Dielectric breakdown voltage | | >25kV/mm | | Pass | | UL 224 | | | | Volume Resistivity | | >1014.cm | | >1015.cm | | ASTM D 257 | | | Chemical | | Copper Corrosion (136 ℃/168hrs) | | No Corrosion | | Pass | | UL 224 | | | | Stability | | Elongation>100% | | >200% | | UL 224 | | | | Flammability | | Pass | | Pass | | UL VW-1 | | Adhesive
Lined | | softenning temperature | | | | 100±10℃ | | UL 224 | | | | Peel adhesion | | | | ≥50N/cm | | UL 224 | |
| |
|
| | Dimensions | | C-11(3X) | | ORDER
REF.Size | Inside Diameter | Recovered Wall Thickness After Heating (NOM) | | | Minimum Expanded
as Supplied | Maximum Recovered
After Heating
| Total Wall After
Heating | Adhesive Wall After Heating
(Nominal) | | mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | | | | | | | | | | | 3 | 9/64 | 3 | 0.118 | 1.0 | 0.039 | 1 .00 | 0.039 | 0.50 | 0.02 0 | | 4 | 3/16 | 4 | 0.157 | 1.3 | 0.052 | 1.2 0 | 0.047 | 0.6 0 | 0.024 | | 6 | 1/4 | 6 | 0.236 | 2.0 | 0.079 | 1.4 0 | 0.055 | 0.7 0 | 0.028 | | 9 | 3/8 | 9 | 0.354 | 3.0 | 0.118 | 1.6 0 | 0.063 | 0.8 0 | 0.031 | | 12 | 1/2 | 12 | 0.472 | 4.0 | 0.157 | 1.8 0 | 0.071 | 0.9 0 | 0.035 | | 15 | 5/8 | 15 | 0.591 | 5.0 | 0.197 | 2 .00 | 0.079 | 1 .00 | 0.039 | | 18 | 3/4 | 18 | 0.709 | 6.0 | 0.236 | 2 .00 | 0.079 | 1 .00 | 0.039 | | 24 | 1 | 24 | 0.945 | 8.0 | 0.315 | 2.4 0 | 0.094 | 1.2 0 | 0.047 | | 30 | 1 3/16 | 30 | 1.181 | 10.0 | 0.394 | 2.4 0 | 0.094 | 1.2 0 | 0.047 | | 40 | 1 9/16 | 40 | 1.575 | 13.3 | 0.525 | 2.5 0 | 0.098 | 1.2 0 | 0.047 | | 50 | 2 | 50 | 1.969 | 16.7 | 0.656 | 2.60 | 0.102 | 1.30 | 0.051 | |
| | | C-11(4X) | | ORDER
REF.Size | Inside Diameter | Recovered Wall Thickness After Heating (NOM) | | | Minimum Expanded
as Supplied | Maximum Recovered
After Heating
| Total Wall After
Heating | Adhesive Wall After Heating
(Nominal) | | mm | inch | mm | inch | mm | inch | mm | inch | mm | inch | | | | | | | | | | | 4 | 3/16 | 4 | 0.157 | 1 .0 | 0.039 | 1.10 | 0.043 | 0.55 | 0.022 | | 6 | 1/4 | 6 | 0.236 | 1.5 | 0.059 | 1.40 | 0.055 | 0.70 | 0.028 | | 8 | 11/32 | 8 | 0.315 | 2 .0 | 0.079 | 1.70 | 0.067 | 0.85 | 0.033 | | 12 | 1/2 | 12 | 0.472 | 3 .0 | 0.118 | 2.20 | 0.087 | 1.10 | 0.043 | | 16 | 21/32 | 16 | 0.630 | 4 .0 | 0.158 | 2.30 | 0.091 | 1.15 | 0.045 | | 20 | 13/16 | 20 | 0.787 | 5 .0 | 0.197 | 2.40 | 0.094 | 1.20 | 0.047 | | 24 | 1 | 24 | 0.945 | 6 .0 | 0.236 | 2.70 | 0.106 | 1.35 | 0.053 | | 32 | 1 1/4 | 32 | 1.260 | 8 .0 | 0.315 | 2.90 | 0.114 | 1.45 | 0.057 | | 40 | 1 1/ 2 | 40 | 1.575 | 10 .0 | 0.394 | 3.00 | 0.118 | 1.50 | 0.059 | |
|
| |
|
|
|
|
|
|
