| |||||||||||||
Self-Fusing Silicone Tape
Adhesive free tape fuses only to itself.
Tape features:
Recommended for electrical insulation, pipe repair, moisture and
corrosion resistance.
Creates a Permanent Air-Tight, Water-Tight Seal in seconds!
Never gets gummy or sticky like electrical or duct tape - No messy
cleanup!
Is extremely versatile!
Class "H" material (180°C/ /356°F continuous operation).
Workable at extremely low temperatures.
Excellent conformability.
Excellent instantaneous fusion; does not need to be held down.
Resists Fuels, Oils, Acids, Solvents, Salt Water, Road Salt, UV
Rays
Applications:
Keep it on board vehicles & equipment for emergency hose
repair!
Seal leaky hoses, pipes, tubing, lines, & fittings
Neaten up lines and extension cords in stowage
Wrap tools and handles for a GREAT non-slip grip
Wrap wiring harnesses and custom split-looming
Waterproof electrical connections and terminals
Use it as an emergency fan belt!
Make emergency O-Rings
Wrap hydraulic fittings and other exposed metal connections to help
prevent corrosion
Works even over wet, dirty, or oily surfaces!
Use it as a tourniquet or emergency wrap over bleeding injuries
Wrap it around ANYTHING that you want secure, and it will never
leave any sticky residue
Specifications:
The insulating tape must be composed of self-fusing, inorganic silicone rubber with an easy-tearing and easy-stripping polyester liner. The color include gray, red, green, blue, and yellow. The tape must be capable of operating continuously at Class H temperatures (180°C/356°F). The tape must be compatible with all synthetic cable insulations as well as cable splicing compounds.
Characteristics and Test Data:
No. | Test Item | Unit | Requirement | Test r esult | |
BST-1 | BST-2 | ||||
1 | Tensile strength | MPa | ≥ 1.7 | 5.1 | 3.1 |
2 | Elongation at break | % | ≥ 500 | 950 | 650 |
3 | Heat resistance | pass | 168h at 100° C | 168h at 150° C | |
4 | Self adhesive property | pass | pass | pass | |
5 | Dielectric Withstand AC Voltage | kV/mm | ≥ 20 | 25.1 | 21.3 |
6 | Volume resistivity | m | ≥10^12 | 2.5×10^13 | 4.8×10^12 |
7 | Dielectric loss angle tangent | ≤ 0.035 | 0.029 | 0.018 | |
8 | Dielectric constant | ≤ 3.5 | 3.3 | 3.1 | |
9 | Tracking | 1A3.5 | |||
10 | Applications | High temperature resistance | Outdoor foul resistance | ||
Pre-mould termination Specification 8.7/15kV Silicone Rubber Pre-mould Indoor(Outdoor)Termination Voltage 1&3 core indoor(Outdoor) Pre-mould ...
Pre-mould joint 8.7/15kV Silicone Rubber Pre-mould Joint Voltage 1&3 core Pre-mould Joint Suit for cable Section (mm 2 ) Insulation OD of ...
Silicone tube UsageIt's use in the drinking machine, coffee maker, alembic, clean water machine, shower, disinfector, jam machine, water heater, and ...
Advanced cold runner production which reduces material waste and enables the production of flash-free parts (no gate hole and no cryogenic de-flashing ...
Silicone moulding parts We provide wide range of silicone moulded parts which comprise of bushes, grommets, O-rings, washers, keypads, joint push rod ...
10kV heat shrink termination Specification Name Type Cross section(mm 2 ) 10kV indoor 3-cores termination IHSY-10/3.1 25-50 IHSY-10/3.2 70-120 IHSY-10...
