【Explain】 | Item NO.:HA-12 Specification:10g x 1pc Package:24card/CTN
Measurement(cm):29x21x36 Performance and characteristics:
This kind of adhesive is developed and produced by the latest
scientific formula. It has the characteris-tics of high bonding
intensity and wide suitability for different materials. Also, it''s
colorless, transparent and of low toxicity. At room temperature, it
can rapidly solidify in five minutes and is very easy to use. It
can bond various metal materials and nonmetallic materials, such as
plastics, leather, pottery and pottery and porcelain, glass,
jewellery and wood, etc. After its solidifying, it will have a fine
performance of waterproof. Oilproof and chemicals resistance. It
may be grinded and filled. It is widely used in industrial
manufacturing, assembling, repairing as mending of household
electrical appliance and daily artiales. Using method:
1. Clean and dry the surfaces to be bonded. For smooth surface
you''d better to sand grind it first.
2. Turn the lid off the tube, pierce aluminium seal of tube mouth
by coping, squeeze out equal volume of adhesive liquid and
solidification agent from tubes A and B, then mix them evenly with
blending board and use immediately.
3. Apply the blended adhesive on the surfaces of material or
appliance to be bonded and mended. It can be solidified in five
minutes after the surface is bonded together at room temperature.
The things bonded may be used in three hours.
4. Points for attention:
Don''t exchange the lids of tubes A and B with different colours.
For ebery-time use, blend proper quantity of adhesive according to
requirements. Blend adhesive as you need and use it up within three
to four minutes.During using, avoid touching amd sticking skin. In
case of touch, please wash skin with soap and water at once. Keep
it away from children. Storage:
The best using period is one year. When it is overdue but it
doesn''t go bad, it can stil be used.
Applications:
PASCO CONTACT ADHESIVE gives an exceptionally firm and reliable
bond on plastic laminates, wood, rubber, leather, felt, cork, rigid
PVC, metal and lots more. Characteristics:
Bond formed is elastic, thus can absorb material tensions
Waterproof and resistant to have hest diluted and alkalis. Instructions:
Surfaces to be glued must be dry clean and free from grease. Apply
adhesive evenly into both surfaces to be bonded. Wait for about 10
to 15 minutes until the adhesive feels dry. Firmly pfree both
surfaces together. The strength of bond is determined by the amount
of pressure applies, but not by the bonding duration. Cautions:
Avoid contact with skin and eyes, once it occurs, flush wiuth water
and consult doctor immediately. Keep out of reach of children.
|
